-40%
Alcon Racing Brake Caliper
Alcon Racing Brake Caliper
Alcon Racing Brake Caliper
Alcon Racing Brake Caliper

Alcon Racing Brake Caliper

$ 132

Availability: 100 in stock
  • Surface Finish: Alloy
  • Returns Accepted: ReturnsNotAccepted
  • Condition: This appears to be a new Caliper maybe used for mockup but no signs of having been used or even having any pads installed. But whoever stored it or handled it beat it up pretty good. Lugs do not appear to be drilled to a full size bolt and bridge tube is damaged and bleeders are ugly from sitting around
  • Placement on Vehicle: Right
  • Brand: Alcon
  • Warranty: No Warranty

    Description

    This large Alcon caliper appears to possibly been used for mockup as it still has some bluing on the lugs and has fairly small holes still. This caliper is for the 3.5 inch bolt pattern and has staggered piston sizes which are the 1 3/4 and 1 5/8 and are 4 piston design and will take a 1 1/4 to 1 3/8 rotor. the caliper even though it is a little ugly there is not much that is critical but needs a bridge tube replaced and at least the bleeders cleaned or replaced and there is only one small reference number on this caliper which is either COL 1056 or it could be GOL 1056 which I do not find anywhere. Caliper is 10.5 inches long and about 7 .25 wide. Only have this one for right side but it can be used for either side by changing parts position. Seems to be an items form the 1980s if I had to guess.
    Track Page Views With
    Auctiva's FREE Counter