Hioki PW3337 3 Ch. AC/DC Power Meter for 1 Phase to 3 Phase

Description

Hello everyone.
This is the Hioki PW3337-02 3 Ch. AC/DC Power Meter for 1 Phase to 3 Phase w Hioki 9661(500A) Clamps.
This item is in good working condition(tested!) and good on its exterior also.
(No other peripherals besides shown in the pictures)
3ch, built-in D/A output
Key Features
• Compatible with the SPECpower® benchmark for server power consumption SPECpower® is a registered trademark of Standard Performance Evaluation Corporation • Measure DC, and single-phase 2-wire to 3-phase 4-wire with 3-channel input
• For development and production of motors, inverters, power conditioners, power supplies, and other devices
• High-precision basic accuracy of ±0.1 % (*1) (*1) For complete details, please refer to the specifications
• Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC
• High-current measurement up to 65 A of direct input
• Harmonic measurement up to the 50th order according to IEC 61000-4-7 • High-accuracy measurement, even with a low power
factor for no-load testing of transformers and motors
• Built-in external sensor input terminals to measure up to 5000 A AC
• Synchronize up to 8 units for multi-unit measurement
• Create a 6-channel power meter by synchronizing two PW3337 units and using the free PC application
Measurement lines
Single-phase 2-wires, single-phase 3-wires, 3-phase 3-wires, 3-phase 4-wires (voltage / current measurement range set for each wiring mode)
Measurement items
Voltage, Current, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Efficiency, Current integration, Active power integration, Integrated time, Voltage waveform peak value, Current waveform peak value, Voltage crest factor, Current crest factor, Time average current, Time average active power, Voltage ripple factor, Current ripple factor
Harmonic parameters
Synchronization frequency range: 10 Hz to 640 Hz, Analysis order up to 50th
Harmonic voltage RMS value, Harmonic current RMS value, Harmonic active power, Total harmonic voltage distortion, Total harmonic current distortion, Voltage fundamental waveform, Current fundamental waveform, Active power fundamental waveform, Apparent power fundamental waveform, Reactive power fundamental waveform, Power factor fundamental waveform (displacement power factor), Voltage current phase difference fundamental waveform, Interchannel voltage fundamental wave phase difference, Interchannel current fundamental wave phase difference, Harmonic voltage content % , Harmonic current content % , Harmonic active power content %
(The following parameters can be downloaded as data during PC communication but not displayed: Harmonic voltage phase angle, Harmonic current phase angle, Harmonic voltage current phase difference)
Measurement range
Voltage range: AC/DC 15 V to 1000 V, 7 ranges
Current range: AC/DC 200 mA to 50 A, 8 ranges
Power range: 3.0000 W to 150.00 kW (Depends on combination of voltage and current range)
Integration measurement (Integration time up to 10,000 hours)
[Current] No.of displayed digits: 6 digits (from 0.00000 mAh, Polarity-independent integration and Sum value)
[Active power] No.of displayed digits: 6 digits (from 0.00000 mWh, Polarity-independent integration and Sum value)
Input resistance (50/60 Hz)
[Voltage] 2 MΩ, [Current] 1 mΩ or less (direct input)
Basic accuracy (Active power)
±0.1% rdg. ±0.1% f.s. (DC)
±0.1% rdg. ±0.05% f.s. (45 Hz to 66 Hz, at Input < 50% f.s.)
±0.15% rdg. (45 Hz to 66 Hz, at 50% f.s. ≤ Input)
Display refresh rate
5 times/s to 20 seconds (depends on average times settings)
Frequency characteristics
DC, 0.1 Hz to 100 kHz
D/A output (-02/-03 model only)
16 channels (selectable from following items), Level output DC ±2 V, Waveform output 1 V f.s.
Level output, instantaneous waveform output (voltage, current, active power)
Level output (apparent power, reactive power, power factor, or other)
High-speed active power level output
Functions
[Rectification method] AC+DC, AC+DC Umn, AC, DC, FND, Auto-range, Average, VT or CT ratio settings, Synchronized control, MAX/MIN, or other functions
Interfaces
RS-232C / LAN standard, (-01/-03 model also includes GP-IB)
Power supply
100 to 240 V AC, 50/60 Hz, 40 VA max.
We sell this unit to worldwide ebayers with the fixed international shipment fee 5.00(USD).
(Using EMS, taking about 5~8 working days to get to you excepting your duration of customs clearance)
Item location is Seoul Korea.
Winner needs to give us receiver's phone number for prompt and exact shipment!
(Delivery agency in Korea does not accept international air parcel without receiver's phone number.)
If the unit is not the same as described, you can return the unit in 7 days.
Then, we can refund full amount of your bid with round trip cost of delivery right after we get the unit.
We can offer combined shipment for a little saving your delivery fee.
Thank you for your interest.